CEMA handbooks, American and Australian equipment and many older South African drawings use imperial units: belt widths in inches, speeds in feet per minute, capacities in short tons per hour and belt ratings in PIW. SANS and ISO specifications are metric. The converter above covers the conversions that come up most when comparing quotes and datasheets.
Conversion factors
| From | To | Multiply by |
|---|---|---|
| inch | mm | 25.4 |
| ft/min | m/s | 0.00508 (or ÷ 196.85) |
| short ton/h (stph) | t/h | 0.9072 |
| long ton/h | t/h | 1.0160 |
| PIW (lb per inch of width) | N/mm | 0.1751 |
| hp | kW | 0.7457 |
| lb/ft³ | t/m³ | 0.01602 |
| ft | m | 0.3048 |
| lbf | kN | 0.004448 |
Belt ratings: PIW and N/mm
American fabric belts are rated in PIW, the allowable working tension per inch of width, while EP ratings such as EP630 give the breaking strength per mm. They are not directly comparable: a 440 PIW belt converts to about 77 N/mm working tension, which at a safety factor of 10 corresponds to roughly an EP800 belt. Ask your supplier to confirm equivalence rather than converting the number alone. Use the specification decoder to see the working tension of a metric belt.
Inch and metric belt widths
Inch widths are close to, but not the same as, metric ones: 24 in is 610 mm (nearest metric 600), 36 in is 914 mm (900), 42 in is 1 067 mm (1 050), 48 in is 1 219 mm (1 200), 60 in is 1 524 mm (1 500) and 72 in is 1 829 mm (1 800). A metric belt on an inch-width conveyor usually works, but check skirt rubber, scrapers and idler roll lengths.
Frequently asked questions
How many N/mm is 1 PIW?
Is a ton the same as a tonne?
What is 600 ft/min in m/s?
Get quotes for what you have sized
Used the figures above to size a belt, drive or conveyor? Press Ask for quotes with these figures in the calculator and they are copied into the quote form at the bottom of this page. A supplier or contractor who works in your area replies directly.
- BL-10Conveyor Belt Types and SizesTextile EP/NN belts to SANS 1173, steel-cord to SANS 1366
- BL-04Conveyor Belt for SaleNew and used rubber, PVC and steel-cord belting
- BL-05Used Conveyor BeltsWidths from 450 to 1800 mm, depending on stock
- CP-07Conveyor Drives and MotorsSquirrel-cage motors, drum motors and geared units
- BL-01Conveyor BeltingTextile EP and NN belting to SANS 1173, steel cord to SANS 1366 and ISO 15236
More calculators and guides
- TL-01Conveyor Capacity CalculatorTonnes per hour from belt width, speed, trough angle and material
- TL-02Belt Speed CalculatorBelt speed from motor rpm, gearbox ratio and drive pulley diameter
- TL-03Conveyor Power CalculatorDrive power, effective tension and a minimum belt rating
- TL-04Belt Length CalculatorEndless belt length from pulley centres and diameters, plus splice
- TL-05Belt Roll CalculatorRoll length from diameter, roll diameter from length, and roll mass
- TL-06Belt Specification DecoderWhat EP630/4 6+2 M or ST1600 8+6 X means, with tension and pulley size
- TL-07Bulk Material ReferenceDensities, surcharge angles, maximum inclines and belt speeds